查看: 285|回复: 0

[标准] ETSI EN 300-019-2

[复制链接]
发表于 2015-1-14 08:18:04 | 显示全部楼层 |阅读模式

登录后才可以下载和分享资料

您需要 登录 才可以下载或查看,没有帐号?注册

x
ETSI EN 300 019-2: "Specification of environmental tests"
Part 2 specifies the recommended test severities and test methods for the different environmental classes.
  • Part 2-0: Introduction. V2.1.2 (2003-09)
  • Part 2-1: Specification of environmental tests; Storage V2.1.2 (2000-09)
  • Part 2-2: Transportation. V2.1.2 (1999-09)
  • Part 2-3: Stationary use at weather protected locations. V2.2.2 (2003-04)
  • Part 2-4: Stationary use at non-weather protected locations. V2.2.2 (2003-04)
  • Part 2-5: Ground vehicle installations. V3.0.0 (2002-12)
  • Part 2-6: Ship environments. V3.0.0 (2002-12)
  • Part 2-7: Portable and non-stationary use. V3.0.1 (2003-04)
  • Part 2-8: Stationary use at underground locations. V2.1.2 (1999-09)

Part 2-3 and Part 2-4 are applicable to enclosures and cabinets manufactured by Purcell Systems. The purpose of these documents is to specify the test severities and methods for verification of the required resistibility for equipment which is to be stored, transported and used in the environments stated in Part 1. The purpose of the environmental testing is to demonstrate that equipment under defined environmental conditions can survive without irreversible failures and perform according to requirements. These tests are not reliability tests or lifetime tests.
回复

使用道具 举报

您需要登录后才可以回帖 登录 | 注册

本版积分规则

快速回复 返回顶部 返回列表